Ciencias Exactas y Ciencias de la Salud
Permanent URI for this collectionhttps://hdl.handle.net/11285/551014
Pertenecen a esta colección Tesis y Trabajos de grado de los Doctorados correspondientes a las Escuelas de Ingeniería y Ciencias así como a Medicina y Ciencias de la Salud.
Browse
Search Results
- DC-DC high-order converters for renewable applications(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2024-05-07) Garza Arias, Enrique; Valdez Resendiz, Jesús Elias; Rosas Caro, Julio César; Escobar Valderrama, Gerardo; Castañeda Cuevas, Herman; Escuela de Ingeniería y Ciencias; Campus Monterrey; Guillén Aparicio, DanielThis dissertation develops new theory and techniques for DC-DC power converters interfacing renewable energies, specifically for converters classified as high-order based on their mathematical model, and thus generally more complex and difficult to analyze. The thesis encompasses the development of a new circuit topology, a control design focused on high-order dynamic systems, and the study of conversion systems between renewables and the utility grid. The dynamics of high-order converters present challenges for the stability and synthesis of controllers. By studying the nonlinear model of fourth-order non-minimum phase converters through zero dynamics, it has been established that some of these can attain stability under direct voltage at high regulation, in contrast to second-order converters. Controllers have been designed to take advantage of these results in order to remove the current sensing stage while still achieving high bandwidth voltage regulation. Research has also been conducted into creating novel DC converters with a lower component size than similar circuits. From this, an improved super-boost converter has been developed that requires lower energy storage on its capacitors and inductors than the traditional boost and fourth-order boost converters, for a given specification of input current and output voltage ripples. Additionally, an inverter system for a fuel cell stack has been developed using double-dual converters in cascade to increase the voltage gain and power handling of the system. Results from tests at different power and voltage levels show that the proposed system also achieves reduced switch voltage stresses and reduced output current ripples. Simulation and experimental results were obtained in order to validate the theoretical analysis. Mathematical models, steady state values and stability conditions were calculated, and prototype designs were developed to corroborate the performance of the converters, control and efficiency.
- Detección de Salmonella typhimurium mediante un inmunosensor basado en microbalanzas de cristal de cuarzo (QCM) inmovilizado con nanopartículas de oro funcionalizadas(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2022-02-28) Ortega Valencia, Jose Erick; Oseguera Peña, Joaquín Esteban; mtyzramirez; Oliva Ramírez, Jacqueline Liszeth; Melo Máximo, Lizbeth; Uribe Lam, Esmeralda; Departamento de Ingeniería y Ciencias; Campus Estado de México; Melo Máximo, Dulce ViridianaDetección de Salmonella typhimurium mediante un biosensor utilizando cristales de cuarzo como material piezoeléctrico basado en la modificación superficial con nanopartículas de oro previamente funcionalizadas e inmobilizadas con cisteinatos y anticuerpos de Salmonella typhimurium.
- Enhancing physical properties of aluminum 6061 by electrodeposition of multi-walled carbon nanotubes(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2021-02-08) Rodríguez Salinas, Juan José; RODRIGUEZ SALINAS, JUAN JOSE; 37308; Elias Zuñiga, Alex; qro /|bqrotbecerra; Cardenas Aleman, Eduardo; Olvera Trejo, Daniel; Palacios, Luis Manuel; School of Engineering and Sciences; Campus Monterrey; Martinez Romero, OscarThe development of a new generation of material has been of great interest in the ever-demanding industrial applications. This new generation of materials is required to be lighter, economical, and machinable with increased mechanical, electrical, thermal, and tribological properties. This work proposes the use of Nanotechnology as a development tool to overcome these demands. This work proposed the use of carbon nanotubes as the medium to enhance the electrical and thermal properties of the aluminum by the deposition of a nano coating of carbon nanotubes over the surface of the aluminum by an electrochemical process that modify the surface of the aluminum creating a thin film that enhances its physical properties. The samples produced by electrodeposition show an increment in electrical, thermal, and tribological properties. This results produced a new generation of nano-enhanced commercial aluminum that could be used for electrical applications. Finally, these results guide the first steps towards a scale-up EDP for industrial applications.
- Implementation of a fuzzy logic based system for the generation of a risk indicator in a DC electric arc furnace(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2019-05-20) Erives Sánchez, Omar; ERIVES SANCHEZ, OMAR;;892453; Micheloud Vernackt, Osvaldo Miguel; School of Engineering and Sciences; Campus Monterrey
- Effects of Sorghum Digestibility, Endosperm Texture and Type Phenolic Profile on Postharvest Resistance to Maize Weevil and Fuel Ethanol Production(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2012-01-12) Chuck Hernández, Cristina Elizabeth.; CHUCK HERNANDEZ, CRISTINA ELIZABETH;;2227837; Sr. Sergio Serna Saldivar.; Dr. Silverio García Lara.
- Diseño, Implementación y Validación de Sistema para Micromanufactura por UEDM(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2012-01-12) Chaides Zúñiga, Oscar; CHAIDES ZUÑIGA, OSCAR; 229095; Dr. Horacio Ahuett Garza; Dr. Ciro A. Rodríguez González; Dr. Héctor Siller CariilloEl objetivo general del siguiente documento es presentar los resultados obtenidos, sobre la fabricación de microcanales en materiales conductores por medio de ?EDM los cuales pueden ser empleados para la generación de micro estructuras. Se desarrolló una
- Estrategias para la Purificación de Proteínas Pegiladas Utilizando Cromatografía de Interacción Hidrofóbica: Ribonucleasa A como Modelo de Estudio(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2012-01-05) Mayolo Deloisa, Karla P.; MAYOLO DELOISA, KARLA PATRICIA; 163081; Dr. Marco A. Rito Palomares; Dr. Juan A. Asenjo de LeuzeLa PEGilación es la unión covalente de una proteína a una o varias cadenas de poli(etilen glicol) (PEG). Esta técnica ha sido utilizada para mejorar las propiedades fisicoquímicas de varias proteínas utilizadas como drogas terapéuticas. Durante la reacció
- Combining artificial intelligence and robust techniques with MRAC in fault tolerant control(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2011-12-01) Vargas Martínez, Adriana; Vargas Martínez, Adriana; 581338The investigation of this thesis presents different approaches for Fault Tolerant Control based on Model Reference Adaptive Control, Artificial Neural Networks, PID controller optimized by a Genetic Algorithm, Nonlinear, Robust and Linear Parameter Varyin
- Methodology Based on the State Transition Concept for Simple Constitutive Modeling of Smart Materials(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2011-01-12) Varela Jiménez, Manuel Ignacio; Varela Jiménez, Manuel Ignacio; 256743; Dr. Jorge Armando Cortés Ramírez; Dr. Alex Elías ZÚñiga; Dr. Jaime Bonilla RíosSmart materials have the capability to sense and respond to environmental stimuli in a predictable and useful manner. Its existence has transformed the paradigm that materials can be used only for structural purposes into the concept that these can also b
- The Impact of Statistical Word Alignment Quality and Structure in Phrase Based Statistical Machine Translation(Instituto Tecnológico y de Estudios Superiores de Monterrey, 2011-01-12) Guzmán Herrera, Francisco Javier; GUZMAN HERRERA, FRANCISCO JAVIER; 212325; Dr. Leonardo Garrido Luna; Dr. Stephan VogelStatistical Word Alignments represent lexical word-to-word translations between source and target language sentences. They are considered the starting point for many state of the art Statistical Machine Translation (SMT) systems. In phrase-based systems,